Heavy-duty internal threaded anchor with triple expansion sleeve geometry for low edge clearances.

Heavy-duty anchor TA M

The fischer heavy-duty anchor TA M is an internal threaded anchor made from zinc-plated steel for pre-positioned installation. The heavy-duty anchor is ideal for anchoring fall protection devices, systems, and machines in non-cracked concrete. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances. The plastic cap protects the thread from soiling. This keeps the thread smooth.

Produkt varijante

Download of image data

Produkt varijante

Atesti / izvješća testova

7 produkt varijanti

Drill diameter

Packaging

Amount

GTIN (EAN-Code)

Legenda = Posjeduje atest— = Ne posjeduje atest

Pregledano 7 od 7 verzija

Advantages

The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The red plastic cap protects against soiling and thus ensures free-running of the thread.

Applications

Steel constructions
Handrails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Stand-off installations

Building materials

Approved for:

Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-04/0003
DoP No. 0263

Functionality

The TAM is suitable for pre-positioned installation.
When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered.

Mounting Strip 1 Picture

1 / 6

ETA Certification Document

pdf, ETA-04/0003

European Technical Assessment for fischer Heavy-duty anchor TA M, TA M S, TA M T - Mechanical fasteners for use in concrete

izdato 12. 06. 2018.

DOP - Declaration of Performance

pdf, DoP No. 0263

Declaration of Performance for fischer Heavy-duty anchor TA M, TA M S, TA M T (Mechanical anchor for use in concrete)

izdato 12. 01. 2021.

Load Table

pdf,

Heavy-duty anchor TA M - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Sistemske komponente

Hammer drill bit Quattric II S / Quattric II
95 Varijante

ETA-approval
Drill diameter ( d₀ )	10 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209902455

ETA-approval
Drill diameter ( d₀ )	12 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209902462

ETA-approval
Drill diameter ( d₀ )	15 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209902479

ETA-approval	—
Drill diameter ( d₀ )	15 mm
Packaging	without
Amount	1 pcs.
GTIN (EAN-Code)	4006209629208

ETA-approval
Drill diameter ( d₀ )	18 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209902486

Heavy-duty anchor TA M

Produkt varijante

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Dokumenti za preuzimanje