• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
Concrete screw UltraCut FBS II US
  • Product Picture: "fischer UltraCut FBS II 10 x 80 25/15/- US"
  • Product Picture: "fischer UltraCut FBS II 10 x 80 25/15/- US"
  • Product Picture: "fischer UltraCut FBS II 10 x 80 25/15/- US"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Youtube VideoYoutube VideoYoutube Video
    • Youtube VideoYoutube VideoYoutube Video
    • Product Picture
    • Product Picture
    • Product Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
      Art.-No. 536860

      fischer UltraCut FBS II 10 x 80 25/15/- US

      Product Variant
      Download of image data
      Top Features
      • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.
      • The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates.

      Your advantages / Product description

      The high-performance concrete screw for absolute installation ease.
      Advantages
      • With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
      • Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
      • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
      • The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
      • The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
      • The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.
      The fischer concrete screw UltraCut FBS II US is a powerful anchoring solution with top installation comfort. The concrete screw with its pressed-on washer is ideal for slot fixations and the anchoring of wooden constructions as well as beams and sills. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial spacings.
      Youtube VideoYoutube VideoYoutube Video

      Application and approval

      Applications
      • Guard rails
      • Consoles/Base plates
      • Metal profiles
      • Shelving systems
      • Protection barriers
      • Results / beam anchors
      • Temporary anchoring, e.g. of building site equipment
      • Shuttering props
      • Reinforcement of bridges
      • Rehabilitation of old and ailing buildings
      • Rehabilitation of car parks
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      • Reinforcement of existing concrete structures
      • Bricks of clay (EN771-1)
      • Solid sand-lime brick (EN771-2)
      • Perforated sand-lime brick (EN771-2)
      Also suitable for:
      • Concrete C12/15
      • Solid building materials
      • Masonry with a dense structure
      You can find detailed information on building materials in the approval document.
      Approval
      • ETA-15/0352
      • ETA-20/0321
      • ETA-20/0134
      • DoP No. 0185
      • DoP No. 0227
      • DoP No. 0225
      • Z-21.8-2049

      Assembly instruction

      Functionality
      • The UltraCut FBS II is recommended for the push-through installation.
      • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
      • We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
      • The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).
      Show the assembly instruction as pdf file
      Mounting Strip 1 Picture
      1 / 9
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture
      • 7
        Mounting Strip 1 Picture
      • 8
        Mounting Strip 1 Picture
      • 9
        Mounting Strip 1 Picture
      Mounting Strip 2 Picture
      1 / 3
      • 1
        Mounting Strip 2 Picture
      • 2
        Mounting Strip 2 Picture
      • 3
        Mounting Strip 2 Picture
      Mounting Strip 3 Picture
      1 / 2
      • 1
        Mounting Strip 3 Picture
      • 2
        Mounting Strip 3 Picture

      Technical Data

      ETA-approval
      DIBt-approval
      Drill diameter (
      d0
      )      		10 mm
      Min. drill hole depth for through fixings (
      h2
      )      		90 mm
      Screw dimension (
      ds x ls
      )      		12.0 x 80 mm
      Nominal embedment depth / thickness of fixture (
      hnom1 / tfix
      )      		55 / 25 mm
      Nominal embedment depth / thickness of fixture (
      hnom2 / tfix
      )      		65 / 15 mm
      Drive SW 15
      Packaging Folding box
      Amount 50 pcs.
      GTIN (EAN-Code) 4048962251432

      Documents for Downloading

      ETA Certification Document
      pdf, ETA-15/0352
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete
      Created on 05. 10. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0227
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)
      Created on 19. 10. 2020.
      ETA Certification Document
      pdf, ETA-20/0321
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Connector for Strengthening of existing concrete structures by concrete overlay
      Created on 19. 06. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0225
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      Created on 03. 07. 2020.
      ETA Certification Document
      pdf, ETA-20/0134
      European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry
      Created on 14. 07. 2022.
      DOP - Declaration of Performance
      pdf, DoP No. 0185
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      Created on 27. 11. 2020.
      DIBt, National German Certification
      pdf, Z-21.8-2049
      National technical approval - fischer concrete screw ULTRACUT FBS II for the temporary fastening of building site equipment
      Valid from 14. 07. 2021.
      to 14. 07. 2026.
      Load Table
      pdf,
      Concrete screw UltraCut FBS II for temporary fastening - Permissible loads of a single anchor in normal concrete of strength class C20/25 to C50/60.
      Load Table
      pdf,
      Concrete screw Ultracut FBS II US hexagon head with integral washer and FBS II SK countersunk head - Permissible loads of a single anchor in normal concrete of strength class C20/25.
      Load Table
      pdf,
      Concrete screw UltraCut FBS II US/SK - Permissible loads for a single anchor in masonry for Push-through installation.
      Installation Instructions
      pdf,
      fischer UltraCut FBS II 8-14 GVZ/CP
      Marketing Documents
      pdf,
      UltraCut FBS II.
      cd-blue-c6785f99-6nz7h