The cost-effective plastic insulation support for all conventional insulating boards.

Insulation support DHK / DHK 45

The fischer insulation support DHK is the economical plastic insulation support for soft insulation. The optimised geometry of the expansion section ensures a low anchorage depth and reduces the amount of drilling required. DHK is hammered in the push-through installation. When hammered, the ribs expand in the drill hole and the optimal pressure is applied to the DHK. Flexible pins in the plate area adapt to the insulating material, and ensure a sustained contact pressure. The fischer insulation support DHK 90 is suitable for anchoring insulation boards in solid and perforated brick, concrete and aerated concrete.
Produkt varijanteDownload of image data

Produkt varijante

Filter
Filter
10 Product variant (s)
Drill diameter
Disc ø
Anchor length
Min. drill hole depth
Min. effect. anchorage depth
Max. fixture thickness
Viewed 10 of 10 variant (s)

Prednosti / opis proizvoda

Advantages
  • The optimised geometry of the expansion section ensures a low anchorage depth and reduces the amount of drilling required.
  • The flexible DHK plate adapt to the insulating material, and ensures a sustained contact pressure.
  • The simple hammerset installation allows for a quick installation process and thus reduces workload.
  • The colouring of the DHK means that it does not stand out on black clad insulating material in rear-ventilated façades.

Upotreba i atesti

Applications
To fix soft and pressure-resistant insulating materials in rear-ventilated façades, such as:
  • Mineral wool
  • PU panels
  • Light building boards made of wood wool
  • Cork boards / coir matting
  • Polystyrene
  • Foam glass tiles
Building materials
  • Concrete
  • Hollow blocks made from lightweight concrete
  • Vertically perforated brick
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Natural stone with dense structure
  • Aerated concrete
  • Solid brick made from lightweight concrete
  • Solid brick
Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.
Atesti
  • EPD-FIW-20210314-CBD1-EN

Uputstva za montažu

Functionality
  • The DHK is set in push-through installation by using a hammer.
  • The plate size of the insulation support is to be selected in line with the compressive strength of the insulating material: DHK 45 for pressure-resistant; DHK for soft insulating materials.
  • The expansion of the ribs in the drill hole gives the DHK an ideal contact pressure.
  • Temperature range when installed: -40 °C to +80 °C.
Mounting Strip 1 Picture
1 / 3

Dokumenti za preuzimanje

EPD - Environmental Product Declaration
pdf, EPD-FIW-20210314-CBD1-EN
Environmental Product Declaration for fischer Insulation fixings
Vrijedi od 22. 02. 2022.
do 21. 02. 2027.
Insulation support DHK - Recommended loads for a single anchor.
cd-blue-c6785f99-bhvvp