• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
Cantilever
  • Product Category Picture: "Cantilever arm FCA"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      FUS profiles with welded base plate for direct mounting on the base material.

      Cantilever arm FCA

      The cantilever arm FCA is a second base element of the channel system FUS, and is suitable for the installation of pipeline routes along walls. The cantilever arm is directly secured to the substrate by means of the slots in the base plate, which are at 90° to each other. fischer offers standard lengths from 200 to 1000 mm, which means that they do not need to be cut to size. This saves time and money. The electro zinc-plated design is suitable for installations in buildings and the hot-dip galvanised and stainless steel designs are suitable for installations outside and in highly corrosive environments. The fire protection certificate as per MLAR/EN13501 offers additional safety.
      Produkt varijante
      Download of image data

      Produkt varijante

      Filter
      Filter
      30 produkt varijanti
      Fire test report
      Profile
      Length
      Max. recommended static load load case 1
      Max. recommended static load load case 2
      Max. recommended static load load case 3
      Više rezultata
      Pregledano 18 od 30 verzija

      Prednosti / opis proizvoda

      Advantages
      • The fire inspection report in line with MLAR/EN13501 guarantees independently tested functional safety.
      • The graduated range of lengths allows for an ideal adaptation to the application.
      • The arm's solid base plate offers a secure hold for load-bearing construction.
      • The base plate's long slots, which are at 90° to one another, allow the arm to be easily aligned.
      • The stamped serration in the channel gives the sliding nuts a secure hold for high shear loads, e.g. for vertical installation.
      Properties
      • Material FCA and FCA hdg: steel S235JR (material no. 1.0037) acc. to DIN EN 10025
      • Zinc plating: electro zinc-plated and hot-dip galvanised
      • Material FCA A4: stainless steel A4 (material no. 1.4401)

      Upotreba i atesti

      Applications
      • Quick and easy installation of pipelines (e.g. along the wall)
      • FCA: For use in dry indoor areas.
      • FCA hdg: For indoor and outdoor application.
      • FCA A4: For indoor and outdoor applications and in environments with high stress to components due to corrosion.
      Atesti
      • ETA-24/0276
      • GS 3.2/14-175-4

      Dokumenti za preuzimanje

      ETA Certification Document
      pdf, ETA-24/0276
      European Technical Assessment for fischer fischer FCA 41/2,5 Cantilevers - Installation systems for supporting technical building equipment
      izdato 31. 07. 2024.
      Test report (fire protection)
      pdf, GS 3.2/14-175-4
      Advisory Opinion on the strength and deformation behaviour of the fischer FUS channel and of the fischer cantilever arm FCA in the sizes 41 and 62
      izdato 10. 03. 2025.
      Load Table
      pdf,
      Load case 1 / 2 / 3
      Load Table
      pdf,
      FCA 21 / FCA 41
      Load Table
      pdf,
      FCA 62
      Load Table
      pdf,
      FCA 21D / FCA 41D
      cd-blue-c6785f99-6nz7h