Broj artikla 512146

fischer Zykon panel anchor FZP II 13 x 26 M8/SO/17 AL

Name: fischer Zykon panel anchor FZP II 13 x 26 M8/SO/17 AL
Brand: fischer

Produkt varijante

Download of image data

Top Features

Stand-off installation of panels with tolerances.
Compensation of panel thickness tolerances for highest visual requirements.
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of stainless steel.

The adjusting undercut anchor made of A4 stainless steel for natural stone.

Advantages

Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Applications

Exterior façades with high aesthetic requirements
Interior façades with high aesthetic requirements

Building materials

Natural stone (>20mm)
Artificial concrete panels

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-11/0145
DoP No. 0307

Functionality

The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
The anchor is set through stand-off installation.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 6

ETA-approval
Min. panel thickness	30 mm
Total length ( l )	43 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	15,5 mm
Amount	250 pcs.
GTIN (EAN-Code)	4048962112573

ETA Certification Document

pdf, ETA-11/0145

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015

izdato 22. 08. 2024.

DOP - Declaration of Performance

pdf, DoP No. 0307

Declaration of Performance for fischer Zykon-panel anchor FZP II

izdato 01. 07. 2022.

Pribor

fischer Zykon panel anchor FZP II 13 x 26 M8/SO/17 AL

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Tehnički podaci

Dokumenti za preuzimanje