Broj artikla 92018

fischer Highbond anchor dynamic FHB-A dyn 12 x 100/25 gvz

Name: fischer Highbond anchor dynamic FHB-A dyn 12 x 100/25 gvz
Brand: fischer

Produkt varijante

Download of image data

Top Features

Controlled expansion under dynamic stress due to cone shape.
Absorption of dynamic alternating loads via optimum load distribution.
Approved for cracked concrete and according to ETA for static and quasi-static loads in M12 / M16 also for use in anchoring base steel fiber concrete.

The performance class amongst dynamic anchors

Advantages

During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.
The cone shape of the FHB-Adyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete.
The anchor rod FHB-A dyn is also available made from highly corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels.
The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn, and therefore provides an increased level of safety.
The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete.

The fischer Highbond anchor dynamic FHB-A dyn is made of highly corrosion-resistant steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is, for example, ideally suited for fixing bridges for traffic signs or tunnel ventilators in tunnels.

Applications

Jib cranes
Gantry and overhead cranes
Guide rails for elevators
Tunnel ventilators (jet fans)
Gantries in road construction
Antennas and transmitter masts
Industrial robots

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber reinforced concrete (M12 / M16)

Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Atesti

ETA-06/0171
DoP No. 0353
(2103/12/12) - CM

Functionality

The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB.
FHB dyn is approved for pre-positioned and push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
The lock nut prevents the nut from becoming loose.

Vidi uputstvo za montažu u PDF-u

Mounting Strip 1 Picture

1 / 10

Mounting Strip 2 Picture

1 / 11

Mounting Strip 3 Picture

1 / 11

ETA-approval
Drill diameter ( d₀ )	14 mm
Min. drill hole depth for through fixings ( h₂ )	130 mm
Anchorage depth ( h_ef )	100 mm
Width across nut	19 mm
Packaging	Folding box
Amount	10 pcs.
GTIN (EAN-Code)	4006209920183